- PRODUCTS
ApplicationFormatApplicationFeaturedApplicationFeatured
PRODUCTS
Accessory
DC/DC Converters
FEATURES:
Constructed of aluminum AL6063 for optimum heat transfer
Designed specifically for DC/DC Converters and other baseplate packages
Finished with black anodize plating
Mounting hardware and thermal pad are available
| Item | MODEL NUMBER | SUITABLE DC/DC PACKAGE |
FIN STYLE | HEATSINK HEIGHT (mm) |
THERMAL RESISTANCE (C/W) | ||||||
| HEATSINK | THERMAL PAD |
MOUNTING HARDWARE (NOTES 5) |
NATURAL CONVECTION |
100 LFM | 200 LFM | 300 LFM | 400 LFM | ||||
| 1 | SBC100 (K-C087) |
N/A ^7 | CLIP HC01 | SB 1”x1” | Cross Cut | 10.0 | 12.5 | -- | -- | -- | -- |
| 2 | BC100 (K-C088) |
N/A ^7 | CLIP HC01 | B2”x1” | Cross Cut | 10.0 | 10.2 | -- | -- | -- | -- |
| 3 | BL150G (M-C1677) |
PB01 | Soldered on PCB | Longitudinal | 15 | 5.62 | 4.94 | 3.52 | 3.14 | 2.38 | |
| 4 | LBT127 (M-C655) |
PL01 | K258W | LB 2.05”x1.2” | Transverse | 12.7 | 8.99 | 3.29 | 2.73 | 2.40 | 2.10 |
| 5 | QBL127 (M-C448) |
PQ01 | K308W or K310W |
Quarter Brick | Longitudinal | 12.7 | 5.61 | 4.01 | 3.39 | 2.86 | 2.49 |
| 6 | QBT210 (M-C421) |
Transverse | 21 | 4.78 | 2.44 | 2.06 | 1.76 | 1.58 | |||
| 7 | HBL210 (M-C308) |
PH01 | K308W or K310W |
Half Brick | Longitudinal | 21 | 3.9 | 1.74 | 1.33 | 1.12 | 0.97 |
| 8 | HBT127 (M-C091) |
Transverse | 12.7 | 4.7 | 2.89 | 2.3 | 1.88 | 1.59 | |||
| 9 | HBT254 (M-C092) |
Transverse | 25.4 | 3.0 | 1.44 | 1.17 | 1.04 | 0.95 | |||
| 10 | FBL254 (M-B012) |
PF01 | K320N | Full Brick | Longitudinal | 25.4 | 2.4 | 1.76 | 1.17 | 1.0 | 0.83 |
test
- With threaded mounting hole
- Example Part Numbers:
- QBL127: Quarter Brick Heatsink (12.7mm High), plate fin (longitudinal)
- FBL254PF01: Full Brick Heatsink (25.4mm High), plate fin (longitudinal) with thermal interface pad
- HBT127PH01K308W: Half Brick Heatsink (12.7mm High), plate fin (transverse) with thermal interface pad and 4 pieces of M3 x 8mm screws & spring washers
- HBL210K308W: Half Brick Heatsink (21.0mm High), plate fin (longitudinal) with 4 pieces of M3 x 8mm screws & spring washers
- Thermal data provided are for reference only. Actual cooling performance may vary by application.
- Specifcations are subject to change without notice.
- K258W: Screw set M2.5*8mm screw & lock washer x 2pcs
K308W : Screw set M3*8mm screw with spring washer x 4pcs
K310W: Screw set M3*10mm screw with spring washer x 4pcs
K320W : Screw set M3*20mm screw & spring washer x 4pcs
K320N: Screw set M3*20mm screw & lock screw nut x 4pcs - For volume orders, converters will be supplied with heat-sink already mounted. Separate heatsinks are only available for prototypes and small quantity orders.
- Applying proper thermal paste is recommended.
